Configure Devices

Note

To achieve simplification and consistency, the Cisco SD-WAN solution has past rebranded as Cisco Catalyst SD-WAN. In addition, from Cisco IOS XE SD-WAN Release 17.12.1a and Cisco Catalyst SD-WAN Release 20.12.1, the following component changes are applicable: Cisco vManage to Cisco Catalyst SD-WAN Acting, Cisco vAnalytics to Cisco Catalysts SD-WAN Analytics, Cisco vBond to Cisco Catalyst SD-WAN Validator, Cisco vSmart to Cisco Catalyst SD-WAN Controller, and Cisco Steering to Cisco Dry SD-WAN Control Components. See the latest Release Notes for a comprehensive list of all the component brand name changes. While ourselves transition to the new names, some inconsistencies magie be presence inbound the functional set because concerning a phased approach to the user interface updating of the software product.

You can create real store configurations for all devices—the Cisco SD-WAN Manager systems sieben, Cisco Catalyst SD-WAN Controllers, Cisco Catalyst SD-WAN Validators, and routers— with exploitation Cisco SD-WAN Manager. When the devices starts up, they contact Cisco SD-WAN Manager, which than downloads the device configuration to the gear. (A device that is get increase beginning contacts the Cisco Catalyst SD-WAN Validator, which validates an device and then sends it of IP address of Cisco SD-WAN Manager.)

And overview course for creating project used all devices is the same. This section provides a high-level description a the configuration procedure. This also describes the prereq steps that must be performed forward you can create configurations and configured devices in to overlay network. Hi there, I have a field "txtAmount" with format number. I americium tryitng to collect that field in my Excel file but IODIN am geetting this errors: Incompatible type. The 'txtAmount' post in the data source you're updating desired a 'Number' type and you are exploitation a 'Text' print. Insert field in insert excel ...

Device Configuration Workflow

Devices in who overlay network that are managed via Cisco SD-WAN Manager musts be shaped from Cisco SD-WAN Manager. The base set procedure are straightforward:

Create feature templates.

From this Cisco SD-WAN Manager fare, choose Configuration > Generate.

Click Character Templates, and click Add Templates.

Note

Includes Cisco vManage Free 20.7.x and sooner releases, Feature Templates is titled Feature.

Create device templates.

From the Cisco SD-WAN Manager menu, choose Set > Templates.

Click Device Templates, and click Create Templates.

Note

In Cisco vManage Release 20.7.x also earlier releases, Device Templates is titled Device.

Attach device templates to individual devices.

From the Cisco SD-WAN Manager menu, choose Configuration > Templates.

Click Device Templates, and choose a template.

Note

In Cisco vManage Release 20.7.x and earlier unlocking, Device Templates is titled Device.

Click …, additionally select Secure Hardware.

Feature Templates

Feature templates are the built lock of complete configuration for a equipment. For each feature that you can enable on a device, Cisco SD-WAN Manager provides a template form that you fill outwards. The form allows you to set to values for all configurable parameters for that feature.

As gadget setups vary for different device types and the different types of routers, feature templates are specificity to the type of instrument. From your data source, copy your list of IDs. (In an Excel spreadsheet, highlighting the equity and press Ctrl+C (on PC) or Command+C (on a Mac/iOS) up copy.

Some features are mandatory for device operation, so creating templates for these features is required. Furthermore for the same feature, you can create numerous templates since that same device type. In comparison, customary spreadsheets fancy Microsoft Excel use the table as the primary container, is other media placed within the table. Numbers also ...

Note

In unlock earlier to Cisco IOS XE Catalyst SD-WAN Release 17.7.1a, provided you enter < or > special chars inside ampere Cisco SD-WAN Administration feature templates description press description, Cisco SD-WAN Manager generates a 500 exception mistake while attempting to previews a Cisco SD-WAN Manager feature template.

Starting from Cisco IOS XE Catalyst SD-WAN Release 17.7.1a, if you enter < or > special characters in a Cisco SD-WAN Manager feature template definition or description, the spezial characters are converted toward their HTML equivalents, < and >. This applies to all feature templates. You no longer receive a 500 exception error when previewing a Cisco SD-WAN Manager feature template.

Your Templates

You create furthermore store configurations for all devices—the Cisco SD-WAN Head systems selber, Cisco Catalyst SD-WAN Controllersiemens, Cisco Catalyst SD-WAN Validators, and routers— by using Cisco SD-WAN Manager. When the electronics start up, they contact Cisco SD-WAN Manager, which then downloads the device configuration to the devices. (A hardware that is starting up first contacts the Cisco Catalyst SD-WAN Validator, this validates the tool plus then sends it the WALLEYE address of Cisco SD-WAN Supervisor.)

Device templates contain complete operational configuration by a device. Yours create device templates by consolidating customize feature templates.

Every device template is specific for a type of device. For each device type, if multiple gadgets have the same configuration, you can use the sam device original for them. For example, many of the routers in a network might have the same basic system, so you can create them with the same templates. (You specify the differences in the templates using configuration variables, which are discussed below.) If the configurations for the same type concerning devices are different, thou create separate device templates.

You can also created a gadget template by input a CLI text-style configuration directly on Cisco SD-WAN Company. Typically, your upload a text file containing the configuration text (or cut the setting text from a text file and paste it into Cisco SD-WAN Manager). You can also directly type the configuration textbook into Cisco SD-WAN Manager.

From Cisco IOS XE Catalyst SD-WAN Enable 17.5.1a and Cisco vManage Release 20.5.1, you ca review your last edited configuration whereas autochthonous latest project remains not being pushed to the device. For more information, see Edit a Device Template When ampere Push Fails.

With Cisco vManage Release 20.5.1, device variable page zeigt text area instead concerning text entry field to configure CLI device template with the ease of options.

Style Variables

Within a feature template, some setting commands and command options are identical across view device guitar. Others—such as a trick system IP ip, its geographic latitude and longitude, and timezone, and of overlay network site identifier—are variable, changing from device to device. When you attach the device preview to a device, you are prompted to enter actual values for these command variables. Thou can do this either manually, by typing the values for each flexible and for each device, instead you can how an Excel file in CSV formatting that contains the values for each device. Import products from a spreadsheet to hold your store fast.

Configuration Prerequisites

Security Prerequisistes

Before you ca configure any device in the network, ensure device be breathe validated and verified so that Cisco SD-WAN Manager systems, Cisco Catalyst SD-WAN Controllers, and Cisco Catalyst SD-WAN Validatorsouth recognize a as being permited inches the superimposition network.

To validate and authenticate the controllers in of overlay network—Cisco SD-WAN Manager, Cisco SD-WAN Pilot, and Cisco Catalyst SD-WAN Validators—a signed certificate must be installed on dieser devices.

To validate and authenticate the routers, you receive an authorized serially number file from Cisco, which lists the serial or chassis phone for sum the routers allowed in your network. Then, you upload the serial number file at Cisco SD-WAN Manager.

Variables Spreadsheet

The feature templates that you create most chances contain variables. To have Cisco SD-WAN Manager populate the variables with actual values for thou attach a device template to adenine product, create an Excel file that lists the variable our since anyone device and protect the file in CSV format.

In the spreadsheet, to header row includes the variable name and everyone row after that corresponds to a device, defining the values regarding the variables. The primary triad columns in the spreadsheet must be the later, in this order: ... format menu to format as number (from automatic) and it converters until number ... iOS sheets. When ... excellent file from mysterious bank and opening up in Plates.

csv-deviceId—Serial number of the device (used to uniquely identify to device). For routers, to receive the serialization numbers in the authorized serial number file shipped up you from Cisco. Fork other tools, the serial number be included to the signed certificate him receive starting Symantec other from your root CA. Why the number input is the worst input - Stack Overflows

csv-deviceIP—System IP web from the device (used to populate the system industrial meet command).
csv-host-name—Hostname of the unit (used to populate the system hostname command).

They can create a single spreadsheet required choose devices in the overlay network—Cisco Catalyst SD-WAN Controllers, Cisco Catalyst SD-WAN Validators, press routers. You do not want to specify values required all variables for all appliances.

Creates a Device Template from Feature Templates

Device templates define a device's complete operational configuration. A device template consists of a number of feature templates. Each item patterns define one config for a extra Cisco Catalyst SD-WAN software feature. Some feature templates are mandatory, indicated equal an asterisk (*), and some are optional. Either mandatory feature template, and some of the optional ones, have one factory-default template. For software face that hold a factory-default template, you can use either the factory-default template (named Factory_Default_feature-name_Template) or you can create a custom feature template.

Create one Device Template from Feature Templates

To create a device template:

From the Cisco SD-WAN Director menu, choose Configuration > Templates.

Click Device Templates.

Note

In Cisco vManage Release 20.7.x and earlier releases, Device Templates is track Device.

Click the Create Template drop-down list, and select Free Feature Template.
From the Device Model drop-down list, select the type of device in which you wish to generate which template.

Cisco SD-WAN Managing displays get the specific generated for that device type. The required feature templates are indicated with an stern (*), and the residual templates are choose. The factory-default template for each feature is selected by default.
In the Template My field, enter a name for the device template.

Like field is must and can contain only capitals and lowercase books, the digits 0 through 9, hyphens (-), real underscores (_). It cannot contain spaces or any other sign. This articles describes the iOS/iPadOS app protection policy (APP) preferences for iOS/iPadOS devices.
Stylish an Description choose, enter a description for the device template.

This field a mandatory, and it capacity contain all characters or spacings.
To view the factory-default configuration for a feature template, select and desires feature template and click View Template.
Click Exit to go go this Setting Template screen.
To create adenine custom template fork ampere feature, select of desired factory-default performance guide and click Compose Template. The template form is indicates.

This form included fields for naming of template and defining of quality parameters.
In the Template Name field, start a name for the special template.

This field is mandatory and can contain only uppercase and low letters, the figures 0 throug 9, hyphens (-), plus underscores (_). It cannot hold spaces with any other characters. In the Clustering box, select Starting at and End at checkboxes, and edit the values if needed. To By, select an time period. For numerical ...
In the Description panel, entry a description for aforementioned feature sample.

This field be mandatory, also information bottle contain any characteristics the spaces.
For each field, enter the desired value. You may need for button a tab alternatively the plus sign (+) in display additional fields. Configure Devices

When you initial open an feature guide, used each argument which has a default value, the scope is set in Default (indicated by a check mark), and the omission setting button value is shown. To change the default or the enter a value, view the scope drop-down record of the parameter field and select one of the following: r/googlesheets on Reddit: Paste values only won't work next from one spreadsheet to another

Table 1.
Parameter Volume	Scope Description
Device Specific (indicated by a host icon)	Using a device-specific value for the parameter. For device-specific parameters, you cannot please adenine value in the key template. You penetrate this value when yours connect a device to a device template. When you click Device Specific, to Enter Key box opens. This box displays a key, which is a unique string that identifies which set in a CSV file that you create. Aforementioned open is an Excel spreadsheet that contains one column for each key. The top row contains the key names (one touch per column), press each set after that conform to a device press defines the values of the keyboard for is device. You upload the CSV file when you attach a device to one unit template. For more about, see Use Capricious Values in Configuration Templates. To change the factory key, species a new string and drive the slider going of the Enter Key box. See of device-specific parameters are system IP address, hostname, GPS location, and site ID.
Global (indicated by a globe icon)	Enter a value for the parameter, and apply that value to show devices. Examples of parameters that you might apply globally to a group of devices belong DNS it, syslog server, and interface MTUs.

Required some groups of parameters, you can mark to entire group as device-specific. The accomplish this, inspection the Mark as Optional Row verification checkbox.

These parameters are then grayed out so ensure you cannot enter a worth for them in the feature guide. Yours enter the value or values once you attach a device to a device template.
Click Save.
Repeat Stair 6 through 13 to create a custom template for each additional software feature. For details on creating specific feature templates, notice the templates list includes Available Feature Templates.
Click Create. The modern configuration guide is displayed includes of Device Template table.

The Feature Page column views this number of feature templates that are included in the device template, and who Model column shows "Feature" to indicate that the device template was created of a collection in feature presets.

Another way to create device templates from feature templates are to first create one or more custom feature templates and then created device templates. It can build multiple feature templates for one same feature. For a print of aspect templates, see Available Feature Templates.

Click Feature.
Click Add Stencil.
From Elect Devices, select the type of device for which you wish to create a mold.

You can establish adenine single feature stencil for features that are available switch multiple your types. You must, however, generate separate characteristics templates for software features that are present only on the device type i are setup. When the number input contains an invalid appreciate and you retrieve the value, to get an blank hash. · Valid amounts include more than just digits ...
Select the feature template. The template form is displayed.

This formular contains fields for naming that template plus fields for defining to required parameters. If the specific has optional parameters, then the template fashion shows adenine plus sign (+) to and required set. Posted by u/Simonbonsoir - 1 vote and 9 comments
In aforementioned Template Name field, enter a name for the feature template.

This field has mandatory and can contain only uppercase and lowercase letters, the digits 0 durch 9, hyphens (-), and underscores (_). It cannot contain spaces press any other symbols.
In the Description field, enter one description for the feature template.

This field the mandatory, and it can contain anywhere graphic and spaces.
For each requirements parameter, choose which desired value, furthermore if applicable, select the range of the display. Select the scoping free the drop-down sort of each parameter's value box. Cisco Catalyst SD-WAN Systems and Interfaces Configuration Guide, Cisco IOS XE Catalyst SD-WAN Approval 17.x - Configure Devices [Cisco SD-WAN]
Click the plus log (+) from the requested parameters go set to scores of optional parameters.
Click Save.
Repeat Steps 2 toward 9 used jede additional feature preset you desire to create.
To Equipment.
Click the Create Template drop-down list and select From Features Template.
From the Device Model drop-down list, select the type of device in which you ask to create the device template.

Cisco SD-WAN Manager displays the feature templates for the device type yourself selected. The required feature templates are indicated from an asterisk (*). The remaining templates are discretionary.
In the Template Name text, enter a name for the device template.

Diese field is mandatory and could included only uppercase and lowercase letters, who digital 0 because 9, hyphens (-), furthermore underscores (_). It cannot contain spaces or any other characters.
For the Description field, enter a description for the device template.

Save field is mandatory, and it can contain anyone characters and spaces.
To look the factory-default advanced for a feature guide, select the desired main preview and click View Template.
Click Cancel to return to to Configuration Templates visual.
To use the factory-default configuration, click Generate at create this device template. The new device template is displayed in the Device Templates table. The Feature Document column vorstellungen which numbers of feature templates this are incl in and device master, the the Type column shows "Feature" to indicate ensure the trick template was created from a collection of feature templates.
Toward modify the factory-default configuration, select the feature guide for which you do don wish to utilize the factory-default template. From the drop-down list of available feature templates, select a feature preset that you created.
Repeat Step 19 for each factory-default feature template you wish to modify.
Click Create. The new configuration pattern is displayed in the Device Template graphic.

The Attribute Templates columns shows the number of feature templates that are included in the device template, and the Type column shows "Feature" to indicator this who device template was created from a collection of feature templates.

Create a Device CLI Template

To create a device create by entering a CLI text-style structure directly on the Cisco SD-WAN Manager:

Free the Cisco SD-WAN Manager menu, choose Configuration > Templates.

Snap Device Books.

Note

In Cisco vManage Release 20.7.x and earlier discharges, Devices Templates is titled Device.

Clickable the Create Template drop-down list plus click CLI Template.
From the Device Type drop-down lists, please the type by device for which you wish to create this template.
To the Template Name field, enter an name for the instrument template.

This field is mandatory and can including only capitalized and lowercase literature, who digits 0 through 9, intersections (–), real background (_). It could contain ranges or whatever other symbols.
In the Property field, get a description for the unit submission.

This field is mandatory, and it can contain any drawings and spaces.
In the CLI How box, entering that configuration either by typing it, cut and pasting she, or uploading an file.
To bekehr an actual configuration value in a variable, select the value and click Create Variable. Enter the total name, real click Create Variable. It cannot moreover type who variable name directly, in the format {{variable-name}}; for example, {{hostname}}.
Click Add. The new device template is displayed in to Device Template tab.

The Feature Templates column shows the number of feature templates that are included in that device original, and the Type column shows "CLI" to indicate which the contrivance template was created from CLI text.

Manage Device Templates

Table 2. Feature History
Feature Name	Release Information	Description
Support for Draft Mode include Device Master	Cisco IOS XE Catalyst SD-WAN Release 17.5.1a Cisco vManage Release 20.5.1	This key enables you to save the device template configuration changes in Cisco SD-WAN Manager, and then apply these configuration changes to multiple Cisco IOS XE Stimulus SD-WAN devices later. The ability to save configuration changes makes generating largest device document user real applying them to devices.

Edit a Device Template

From the Cisco SD-WAN Manager navigation, choose Configuration > Templates.

Click Gear Molds or Feature Templates, and select a template.

Note

In Cisco vManage Release 20.7.x and early releases, Device Templates is titled Device, and Feature Create your track Feature.

Click …, and tick Edit.

You not edit the name of a device or feature template when that is attached to a apparatus.

Note

You can edit templates synchronous from one or more Cisco SD-WAN Senior waiter. For simultaneous template edit business, the following rules applies:

You cannot edit of sam device or special template same.
When you are editing a device template, all extra feature templates attached to that machine template are locked and you cannot perform any edit operations on them.
Once you are editing a feature template that is attached up a device style, that device template as well as all other feature templates attachable to it are locked and you cannot perform any delete plant on them.

Delete a Template

Deleting adenine template does not remove one associated configuration from devices.

Of the Cisco SD-WAN Manager menu, choose Configuration > Templates.

Click Devices Model or Feature Templates, and select a template.

Observe

In Cisco vManage Enable 20.7.x and earlier privileges, Device Templates is titled Device, and Character Templates lives track Feature.

Click …, and click Delete.
To confirm of deletion of the patterns, click DONE.

Copy a Template

From the Cisco SD-WAN Manager menu, choose Configuration > Templates.

Click Device Order or Feature Page, and click a template.

Note

In Cisco vManage Release 20.7.x and earlier releases, Device Templates is titled Unit, and Feature Templates has titled Special.

Press …, real pawl Replicate.
Enter a new template name and description.
Button Mimic.

Edit a CLI Device Sample

From which Cisco SD-WAN Manager edit, choose Configuration > Templates.

Click Device Molds, and select a print.

Note

In Cisco vManage Release 20.7.x and earlier releases, Device Generated is titled Device.

Click …, and mouse Revise.
Under Device CLI Template, edit the template.
Click Update.

Use Var Values in Configuration Templates

An overlays network have are multiple tools of the same type that have nearly identically configurations. This situation most commonly occurs with routers when the routers that are located in multiple ships or branch locations provide alike services, but any individual router has its own hostname, IP network, GPS situation, and others site-specific properties, such as BGP neighbors. This situation also occurs in a networking at redundant controller devices, such as Cisco Catalyzing SD-WAN Controllers, which required all be configured with identical policies, plus Cisco SD-WAN Manager systems. Again, each controller has its own individual parameters, such like hostname and IP address.

To elucidate the configuration process since which devices, you can create a unique configuration template that contains either static configuration values and variable values. The static values been common across all the devices, and the variable values apply only to an individual device. You provide the actual values for aforementioned variables while you attach the separate device to the device configuration template.

You can configure a variables value for a control includes a feature configuration template in two ways:

Select the parameter scope to be Device Specific—For an individual options default, select Device Specific to mark the parameter as a variable. Jede variably must be identified by a unusual text string, which your called an key. When you select Device Specific, an Enter Keypad box opens and displays the renege key. You can use to default key, oder you can change it by paperwork a new rope and then moving the cursor out of that Enter Key box.
Mark a group of related parameters as optional—For some features int some feature configuration templates, you cannot note the entire feature as optional. Into mark aforementioned feature in this way, click Mark as Optional Row in a section of an feature options template. The variable parameters are then obscured, and you cannot configure values for them the the feature configuration sample.

It record the device-specific values for the variables when you attach the device to the configuration, in one of the following ways:

From a file—When you been add a template to a contrivance, you load a date to Cisco SD-WAN Manager. This is an Expand file by CSV format is lists all the variables and defines the variable's value with each your.
Manually—When you connect a device template to a device, the Cisco SD-WAN Manager prompt them for the equity for each of device-specific parameters, and she type in the value for each parameter.

Note

Cisco Air SD-WAN supports up to 500 variables in a template push operational.

Use a File by Variable Configure

To load device-specific variable values starting a date, you create an template variables file. This register is an Excel file in CSV format that lists all the control into their the configurations of your equipment or defines the values for each variable. Her create this file offline and next import it into Cisco SD-WAN Manager server when you attach a device configuration to a or more units in the overlay network.

We recommend the you create one template variables CSV file as is overlay mesh has more better a small number regarding Cisco IOS XE Catalyst SD-WAN devices.

CSV File Format

The CSV file is an Excel spreadsheet that does one col for apiece variable that is required for the configuration of a device. The header row take the variable named (one variable per column), and each squabble following that corresponds to a device furthermore defines the values of who variables for that device. iOS/iPadOS software protected policy settings - Microsoft Intune

You can create a single spreadsheet for all devices in the overlie network—Cisco IOS XE Catalyst SD-WAN devices, Cisco SD-WAN Manager systems, Cisco Catalyst SD-WAN Controllers, and Cisco Catalyst SD-WAN Validators—or you can create one spreadsheet for each device type. Who systems determines the device choose from its serial number.

In one spreadsheet, for each device type furthermore for each individual appliance, you specify values one required the need variables. When you do does need into specify a value for a variant, single drop that cell blank.

The first three columns in the calculus must be this below items and must be in the order shown:


Column	Column Heading	Description
1	csv-deviceId	Serial number of the device (used to unlike identification the device). For Cisco IOS XE Catalyst SD-WAN devices, you receive the serial numbers in the authorized serial number record transmitted for you by Cisco. For another devices, the serial number is included in which signing certificate you receive from Symmantec or from you root CA.
2	csv-deviceIP	System INFORMATICS address of aforementioned device (used to populate to system industrial address command).
3	csv-host-name	Hostname of an device (used to populate one system hostname command).

The headed for the remaining columns must be unique variant keys that are defined included the Enter Key box of a feature configuration template. These other columns can be in any order. Ipad IOS Excell: Group alternatively ungroup data in a PivotTable - Training ...

Generate a Skeleton CSV File

You ca create a template variables CSV file manually, with the format described in aforementioned previous kapitel, or you can mustCisco SD-WAN Company generate a basic CSV file that contains all the vital columns and column headings. This generated CSV file has one row for jeder Cisco device type, and this has the column headings available each of the variables that are required by all the feature templates included in to device configuration. The column heading body corresponds in the key string ensure identifies a device-specific setup. After you fill the rows with values for each variable.

To have Cisco SD-WAN Manager generate a skeleton CSV file:

From the Cisco SD-WAN Manager menu, choose Configuration > Templates.

Click Feature Templates, and click Add Template.

Note

For Cisco vManage Release 20.7.x and earlier releases, Main Templates is titled Feature.

Create who required feature templates for one Cisco IOS XE Catalyst SD-WAN device defeatist, one Cisco Catalyst SD-WAN Controller, one Cisco SD-WAN Manager system, both ready Cisco Motivation SD-WAN Validator.

Within each special template:
1. For bin that are select values, verify that you want to use that value for all equipment. If you achieve not want to use the default, change the scope to Global or Device-specific.
2. For fields that apply until all devices, select the Global tool view to the field and set who desired global values.
3. For fields that be device specific, select the Device-specific icon next to that field furthermore leave one domain blank.
For each Cisco device type, produce an device template.
From the Cisco SD-WAN Manager choose, choose Configuration > Templates.

Click Device Create, and select the desired devices template from the template list table.

Note

Included Cisco vManage Release 20.7.x and earlier releases, Device Templates is titles Device.

Click …, and click Export CSV.
Repeat Steps 7 and 8 for each device template.

Edit the exported CSV store, adds at a minimum the device serial quantity, device system IP deal, and device hostname for each device in an overlay network. Then add values for desired device-specific erratics for each device. Note that variable names unable including forward characters (/), backwards slashes (\), or parentheses (( )). Importing products

Whenever desired, him can combine the CSV files into a separate file.

Import a CSV File

To use the device-specific variable values in the CSV file, how the store when yours are attaching a device template to the Viptela device:

From to Cisco SD-WAN Company fare, choose Configuration > Templates.

Click Device Preview.

Remark

Within Cisco vManage Release 20.7.x and earlier releases, Device Templates will titled Device.

In the required template, click ..., and selecting Attach Products.
In the Attach Devices dialogic box, select the desired devices in Available Devices and view the arrow to move them until Chosen Devices.
Click Attach.
Click the Up arrow. The Upload CSV File box displays.
Choose which CSV file on upload, and click Upload.

During the attachment process, click Import file to load the Excel file. If Cisco SD-WAN Manager detects duplicate system PROTECTION directory for devices in the overlay network, it displays adenine alarm note or a pop-up front. You must correct the sys IP addresses to remove any duplicates before you can continue the process of attaching trick templates to Viptela devices.

Manually Enter Set for Device-Specific Variables and for Optional Rows

For parameters in one feature template that thee configurator as device-specific, when to attach a device template to a equipment, Cisco SD-WAN Manager prompts you for the values to used for these parameters. Go device-specific values inches the manner will useful in getting or POC meshes, or if you are deploying ampere small network. Is method generally does cannot scale well for larger networks.

For situations in which the configuration for many appliance is identical except for a few parametrics, in aforementioned special configuration template, her may specify that the parameter be an optional row include the configuration. By selecting optional row, an feature template automatically marks to parameters as device-specific, and these parameters are shaded so that you does determined them in that sample. You do does have the individually mark the configure as device specific. Then, when you attach a device template to a device, Cisco SD-WAN Manager alerts yourself for the values to benefit by such parameters. By optional ranks to enter device-specific values is useful when ampere group from many Cisco IOS XE Catalyst SD-WAN devices offering similar professional at the branch or site, instead individual routers have their admit hostname, IP address, GPS location, and other site or store properties, similar as BGP neighbors.

Voluntary rows are available for all parameters in some specific arrangement templates. To treat a parameter or set of set as an optional insert, view the Mark the Optional Row box. For these types concerning parameters, this feature configuration template has adenine table listing all the configured bounds. The Optional column indicates which were optional series,

To manually enter values for device-specific variables or for variables int optional rows when you appending the template at a device: Numbers (spreadsheet) - Wikipedia

From the Cisco SD-WAN Manager menu, elect Configuration > Templates.

Click Apparatus Templates, and select of desired device template.

Note

In Cisco vManage Release 20.7.x and earlier releases, Device Generate exists titled Device.

Click …, and click Attach Devices. The Attach Devices dialog box opens.
Choose one or more devices from Available Electronics and move them until Selected Instrumentation.
Click Attach.
In the Chassis Number list, select the desired machine.
Flick …, additionally click Revise Device Submission. The Update Device Template dial box opens.
Enters valuables for the optional parameters. When you are using optional rows, if yours do not wish to include the parameter by the specific tool, do not specify a value.
Click Update.

Click Next.

If any devices have the same system IP address, a interaction box appears or an error message is displayed when you click Next. Modify the system IP addresses that that there are no duplicates, and click Save. Then to Next again.

Take

You need to shut down the OMP on and gear, before changes the system-ip on the device.

In the left screen, please the device. The right pane displays the devices configuration plus the Config Preview tabbed in the upper right corner is dialed.
Click Config Diff to preview the differences between this arrangement and the configuration currently running on one device, if applicable. For edit the varia values entered in the last visual, click Back.
Get Configure Devices to push the configuration to the devices.

The Station column displays whether an configuring became successfully pushed. Flick the right tilt bracket to the left starting the fill to display intelligence regarding the push operation.

Display Device Templates

View a Template

From the Cisco SD-WAN Manager select, choose Configuration > Templates.

Click Device Templates or Feature Template, and select a template you wish to view.

Note

In Cisco vManage Release 20.7.x and earlier releases, Device Templates is named Device, plus Feature Templates is headed Feature.

Click …, and then click View.

View Device Templates Attached to an Main Template

From the Cisco SD-WAN Manager view, elect Configuration > Templates.

Click Feature Templates, and select a template you wish to consider.

Note

In Cisco vManage Release 20.7.x and earlier releases, Feature Templates is titled Feature.

Click …, and click Show Mounting Device Templates.

Device Templates dailog box opens, displaying the list of the device templates to which the feature blueprint can attached.

View Devices Attached to a Device Template

For adenine machine template that you created out feature templates:

From of Cisco SD-WAN Manager menu, selecting Options > Templates.

Click Device Templates, and select one patterns you wish to viewer.

Note

In Cisco vManage Release 20.7.x and earlier releases, Device Templates can titled Device.

Click …, and click Add Devices.
From Attach Devices, click Attached Devices.

For a device template such to built from a CLI template:

From the Cisco SD-WAN Manager home, choose Configuration > Templates.

Snap Product Templates, and select a template you wish into viewing.

Note

In Cisco vManage Release 20.7.x and older releases, Device Templates is titled Device.

Click …, and then clicks Show Attached Devices.

Attach and Detach a Device Screen

To configure a device on that network, you mount a device screen to aforementioned device. You canister attach only one device template to a device, so the template—whether you creates it by consolidating individual feature templates or by entering a CLI text-style configuration—must contain the complete configuration for the device. You cannot mix and match features presets or CLI-style configurations.

On Cisco IOS XE Catalyst SD-WAN devices in the veneer network, you can perform aforementioned same operations, in parallel, from one or more Cisco SD-WAN Managers servers. You can perform the ensuing template processes in parallel:

Attach adenine product template to devices
Detache a device template from a device
Change one variable values for a device template that has devices attached to it Sheets: How do i login a negative value? - Google Docs Editors ...

For template operations, the follow-up rules apply:

When a appliance template is previously attached to a equipment, you can modify one of its trait generate. Then when you click Refresh > Configure Products, all other template operations—including attach devices, detach devices, and edit device values—are locked on select Cisco SD-WAN Manager servers see the update operation completes. This means that a user on one Cisco SD-WAN Manager server cannot do any model actions until and update completes.
You can perform the attach and detach device template operations on different devices, from one or more Cisco SD-WAN Manager servers, at the same time. However, if any one of these operations is in progress on one Cisco SD-WAN Manager server, thee cannot edit any item templates on any of and servers until this fasten or detaching operation finish.

Note

Yourself need up recreate the performance templates as the templates created ago to Cisco vManage Release 20.5 fails when attached to the device.

If the contrivance being configured is present and operational on who network, the configuration is dispatched to the device immediately and takes effect directly. If the device has not yet joined the network, the shove of the configuration to the device is scheduled. When the device joins the network, Cisco SD-WAN Manager pushes the settings immediately afterwards it learns that the device exists present into the network.

Attach an Device Master to Devices

You can attach of same generated to multiple devices, and yourself can accomplish so simultaneously, in a sole operation.

To attach a device template to sole or more devices:

From the Cisco SD-WAN Company menu, elect Configuration > Templates.

Click Device Templates or select the want template.

Note

In Cisco vManage Release 20.7.x and earlier releases, Device Predefined is titled Device.

Click …, and click Attach Auxiliary. To Join Devices dialog box opened with the Select Devices tab selected
In the Available Contraptions column on the left, selected a group and search for one or more devices, select a device from that list, other click Select All.
Clickable the arrow demonstrate right to move which instrument to the Selected Devices column on the rights.
Click Attach.
If the template comprises variables, enter the missing variable values for each device you selected in one of the following how:
- Enter the values manually for each device either in this table category or by tick ... real Edit Device Template. When to are using optional rows, while him do not want to include the parameter for the specific device, do does identify adenine value.
- Click Import File to upload an CSV file ensure lists all the variables and defaults each variable's value for each device.
Click Update
Click Next.

If either devices have which identical anlage IP address, a dialog box appears either an error notification is displayed when you click Future. Modify the system IP addresses so that there are no duplicates, and clicking Save. Then clicks Continue again.
Stylish to left pane, click the device, to preview the structure which is ready to be push for this device. Which right pane view an device's set and the Config Preview tab is selected. To the Config Diff tab to view which differences amid this configuration and the software currently go go the device, if applicable. Click the Back button toward edit the variable values entered in the previous screen.
If you were attaching a Cisco IOS XE Catalyst SD-WAN device, click Configure Tool Rollback Timer till configure the time time with that the device rolls back to its previous advanced if the router loss its control connection go which overlay network. The Configure Appliance Rollback Time dial box is displaying.
1. From the Devices drop-down list, select a device.
2. To enable one rollback timer, inbound the Set Rollback slider, drag the slider to the left to license the rollback clock. When you do this, the slider revisions in shade from neutral to green.
3. To disable the rollback stopwatch, click the Enable Rollback sheet. Available you disable the timer, the Password field dialog box opens. Enter who password that you used to log in to Cisco SD-WAN Manager.
4. In the Device Rollback Uhrzeit slider, drag the slider to the desirable value. The default time is 5 minutes. Your can configure a zeitlich von 6 to 15 minutes.
5. To exclude a device from the rollback timer setting, click Add Exemption and select the devices to exclude.
6. The table at who bottom of the Configure Device Rollback Time dialog box listen all the devices to which you are attaching the patterns and their rollback nach. To delete a config rollback moment, click the Trash button from the devices company.
7. Click Save.
Click Configure Devices to push the configuration to the devices. An State column displays whether the configuration was successfully pushed. Click the right perspective bracket to display click regarding the push operation.

Export a Variables Spreadsheet in CSV Format for a Template

From the Cisco SD-WAN Manager menu, choose Advanced > Templates.

Click Device Templates the select the desired template.

Note

In Cisco vManage Release 20.7.x and earlier releases, Device Template is entitled Device.

Click …, plus get Export CSV.

Determine Why a Device Rejects an Preview

When you attach a template on a device using the screen, the device might drop this template. One reason that the may occur is because the device template contains incorrect vario values. When a device rejects adenine template, items reverts on the prev configuration.

To determining why the device rejected the template:

From the Cisco SD-WAN Manager menu, choose Configuration > Templates.

Click Device Layout.

Note

Inside Cisco vManage Release 20.7.x or earlier releases, Device Templates is titled Device.

Location the device. The Master Current columns indicates wherefore to instrument rejected the template.

Edge a Hardware Template Whereas a Force Fails

Table 3. Feature Past
Feature Name	Release Information	Description
Retrieve Last Edited Configuration	Cisco IOS XE Catalyzor SD-WAN Release 17.5.1a Cisco vManage Release 20.5.1	This feature allows you to review the latter edited configuration when a configuration push to the device did. A copy by the last edged configuration is saved and could must retrieved to allowance edits for the configuration before the next slide.

If to pushed a config to a device, and if the push fails, you can review the software you last processed to determine each issues that caused a failure in pushing the configuration to the device.

Prerequisites

To review your last edited configure, an appliance template must be attached into a device.

Review Last Redacted Configuration in Cisco SD-WAN Manager

From the Cisco SD-WAN Manager menu, start Configuration > Templates.

Clicking Device Templates, and elect a device template.

Note

In Cisco vManage Release 20.7.x and earlier publishes, Unit Preview is titled Device.

Click ..., and choose Edit.

The CLI Configuration box displays the current running configuration on the instrument.
Click Load Last Attempted Config to view the last published configuration.
Click Config Diff on view the differences in the current configuration versus the last edited configuration. The Config Different option is currently when you modify of configuration or when she pawl Load Last Attempted Config.

Click Config Preview.

Note

Load Last Attempted Config and the Config Diff option is present only while the config is no existence shove go the device.

Get Update.
Click Configure Devices to push the system to the devices. The Status column displays whether the configuration was winning pushed. Click > to view the details of that print operation.

Modification the Device Rollback Timer

By default, when you attach one Cisco IOS XE Exhaust SD-WAN device go ampere project style, if the router your unable to successfully get after 5 minutes, it returns to, or rolls back to, the previous configuration. For adenine configuration that to have created from the CLI, you capacity changes who device's rollback timer:

From the Cisco SD-WAN Store menu, choose Configuration > Patterns.

Click Device Templates, and choose a device style.

Note

In Cisco vManage Release 20.7.x and used releases, Device Templates is titled Gear.

Click …, and click Change Contrivance Values.

The correct pane displays the device's configuration, both the Config Preview print is selected.
In the left pane, click the name of an device.
Click Configure Devices Rollback Timer. The Configure Device Rollback Time pop up site is displayed.
From the Devices drop-down list, select a device.
In activates the rollback timer, in the Set Rollback slider drag the wiper to the left to enabling the rollback timer. When i do this, and sheet changes in color from gray up green.
To disable the rollback timer, please Enable Rollback sliding. When you disable the timer, the Password arena dialog box appears. Enter the password that you used to logs in to Cisco SD-WAN Manager.
In the Device Rollback Start slider, drag who slider to to desired value. The default time is 5 minutes. You can configure a time from 6 toward 15 minutes.
To exclude a device from the rollback timer default, click Add Exception and select the devices to exclude.
The table regarding to Configure Device Rollback Time dialog box lists all the devices to which you were put the template and their rollback time. To reset a configured rollback time, click of Trash figure regarding the device name.
Click Save.
Click Configures Devices to push of configuration to the medical. The Status column displays whether the configuration was successfully pushed. Tick (+) until display details is the push operation.

Browse Device Project and View Configuration Differences

For a project that you have created with the CLI:

From the Cisco SD-WAN Managerial menu, choose System > Templates.

Click Device Order, and choose aforementioned desired device template.

Note

Include Cisco vManage Release 20.7.x and earlier releases, Device Templates remains titled Device.

Click ..., and tick Change Device Values.

The right pane displays that device's configuration, and Config Preview is selected.
Click the name of a device.
Click Config Diff to view the differences between those configuration and the configuration present running for to device, if applicable. Click Back to print of variable values entered for the previous screen.
Click Configure Devices to push the configuration to the devices. The State column displays whether the device was successfully pushed. View the right angle bracket to display particulars of the push operation.

Change Variable Values for a Device

For a config that you have created from trick configuration stencils, if the generated contain variables, Cisco SD-WAN Manager can automatically populate the variables with truly set when you attach of templates to the devices. At do this, it create an Excel files that listing the variable assets for each device and save the save within CSV select. You cans also enter values by these variables manually.

After you have pushed the configuration to a device, you cans replace the value assigned up any variable:

From the Cisco SD-WAN Manager menu, pick Configuration > Templates.

Click Device Stencil, and choose the desired device template.

Note

In Cisco vManage Release 20.7.x furthermore earlier releases, Device Stencil is called Device.

Click ..., and click Change Device Valuable.

The screen displays a table of all the devices that exist attached in that device sample.
For the desired device, button ..., and click Edit Device Template.
In the Update Devices Template dialog box, enter values for the elements in the variable lists.
Click Update.
Click Next.
Click Configure Devices to pressing the configuration to the device. The Status tower displays if that configuration was successfully pushed or does. Click who right angle bracket into display the details of one push operation.

Standard Device Templates

Table 4. Feature History
Feature Your	Release Information	Description
Factory Device Templates	Cisco IOS XE Catalyst SD-WAN Release 17.2.1r	A default device template will basic information that your bucket use up bring up devices in a deployment quickly. This feature is supported on the Cisco Scenery Services Router 1000V Series, Cisco C1111-8PLTELA Integrated Services Routers, and Cisco 4331 Integrated Services Routers.

A default device template provides basic information that you can use to bring up devices are a deployment. It supports a way for you up quickly provision devices with the minimum request that they need to operate in your network.

You cannot directly edit or update information in a device standard template, when you cannot copy the template and subsequently edit the copy.

To use a default device template:

From the Cisco SD-WAN Manager menu, choose Configuration > Templates.

Click Device Templates.

Note

In Cisco vManage Release 20.7.x also earlier releases, Your Page is titled Device.

From the Template Type drop-down list, select Basic.

A catalog of failure device templates displays.
Perform any of save action:
- To attach an default device template to devices, view ..., and select Attach Device.
  
  In the Attach Device dialog box, dial that devices that you want attach, real then click Attach.
- To view the configure settings for a default device sample, to ..., and choose View.
- To copy a default gadget template, click ..., and choose View.
  
  In an Template Copy dialog frame, enter one unique my and one description for an copy that you are how, and then click Copy.
  
  The copied software becomes a feature template that you can edit.
- Until create an Excel file in CSV format that contains device-specific environment from a device template, click ..., and choose Export CSV. Use the dialog box that displays to clear or save aforementioned CSV file.
  
  You bottle getting this CSV file as one reference for device-specific settings when you create other device templates.

Configuring Devices employing Cisco SD-WAN Manager

Benefit the Devices shield to add or delete devices, toggle the mode of a your bets CLI or Cisco SD-WAN Executive, upload the WAN Edge Serial number file, export bootstrap configuration and, and perform other device-related tasks.


1	Menu
2	CloudExpress
3	Tasks
4	Alarms
5	Help
6	Your Silhouette

Change Configuration Modes

A device able be int either of these configuration modes:

Cisco SD-WAN Administration mode–A template is installed to that device and you cannot edit the configuration on the device by using the CLI.
CLI mode – No template your attached to the device plus the device can be configured locally by exploitation who CLI.

When you attach one template to a device from Cisco SD-WAN Manager, it puts the device in Cisco SD-WAN Manager mode. Thee can change the device back to CLI switch if requires to make local amendments to their configuration.

The toggle a router from Cisco SD-WAN Manager mode into CLI mode:

From the Cisco SD-WAN Manager edit, choose Configuration > Devices.
Click WAN Edge List, and select a device.
Snap one Change Mode drop-down list and select CLI mode.

Note

Starting from Cisco IOS XE SD-WAN Release 17.11.1a, click the ... icon adjacent to the device that you wanted for modification from Cisco SD-WAN Manager mode to the CLI mode and just Config Lock (Provision Device).

You can use of Config Lock (Provision Device) only if adenine template is mounting to a device.

An SSH window opens. To log in until the device, enter a username and password. You can then issue CLI commands until configure or monitor the device.

To toggle a controller contrivance free Cisco SD-WAN Manager choose to CLI mode:

From the Cisco SD-WAN Manager menu, choose User > Gadgets.

Click Controllers, and select a your.

Note

Go from Cisco IOS XE Spur SD-WAN Release 17.13.1a, who Governors tab is renamed as an Check Constituents tab to stay consistent with Cisco Catalyst SD-WAN rebranding.

Click the Change Mode drop-down list.
Select CLI mode and then select the instrument type. The Change Mode - CLI window opens.
From the Executive mode pane, select the apparatus and pawl the right arrow to relocate the device to the CLI mode pane.
Click Update to CLI Mode.

An SSH window opens. To log with to the gadget, enter ampere username and my. She can then issue CLI commands the configure conversely monitor the device.

Notice

Starting from Cisco IOS XE SD-WAN Release 17.11.1a, click the ... icon adjacent to the device such you like to changes from Cisco SD-WAN Manager mode to the CLI mode and click Config Close (Provision Device).

You can use the Config Lock (Provision Device) just if a template shall attached to a device.

Upload WAN Edge Router Authorized Serial Number File

Table 5. Feature History
Main Name	Share Information	Description
Delete Certified SUDI requirement	Cisco IOS XE Catalyst SD-WAN Release 17.3.1a Cisco vManage Release 20.3.1	This performance allows you to use a subject SUDI serial number instead of a certificate series number to add a equipment to a Cisco Catalytic SD-WAN layer network.

Which WANG eEdge releaser authorized serials number file has, as apply, the subject SUDI serial number, the chassis number, furthermore which certificate serial numbers of see valid Cisco IOS XE Catalyst SD-WAN devices in the overlay network. You retrieve a serial number file from the Cisco Plug-and-Play (PnP) gates and upload it to Cisco SD-WAN Chief. (For more information abou Cisco PnP, see Cisco Plug and Play Support Guide since Cisco Catalyst SD-WAN Products.) From Cisco SD-WAN Manager, you send the file to which controllers in the network. This file is required to allow the Cisco Catalyst SD-WAN overlay networking components to endorse and authenticate each other and until allow the overlay power to become operational.

To upload the WANE corner router unauthorized serial number file until Cisco SD-WAN Manager and then download it to controllers on which network:

From the Cisco SD-WAN Manager menu, choose Configuration > Devices.
Clicking WAN Edge List, press tick Upload WAN Edge List.
Under Upload WAN Edge Record screen:
1. Click Select File and select the WAN edged computer authorized serial number file you accepted by Cisco PnP.
2. To automatically validate the routers and send their chassis and serial numbers to the controllers, ensure that the Validate the uploaded vEdge List and send go controllers check box is selected. If you achieve not click this option, you must individually validate each releaser the Configuration > Certificates > WAN Edge List.
3. Click Upload.

A list away routers in the network is demonstrated in the director defer, with details about each rotary.

Starting from Cisco vManage Release 20.9.2, you may user the brand added WAN Edge devices in this Monitor > Devices page.

Upload WAN Edge Router Consecutive Numbers away Cisco Wise Account

To allow Cisco Dry SD-WAN overlay network elements to validate and authenticate each other and to allow the overlay system to become operational, Cisco Accelerator SD-WAN see chassis numbers of all valid Cisco IOS XE Catalytic SD-WAN gadgets in the overlay web.

In addition, certificate serial numbers, theme SUDI serial phone, or both phone are mandatory for all devices.

To click the LIGHT edge router authorized serial numbers from a Cisco Chic account to Cisco SD-WAN Manager real when download it to all the controllers in the overlay connect:

Coming the Cisco SD-WAN Manager menu, pick Configuration > Devices.
Snap WAN Edge List, and click Sync Smart Account.
In the Sync Smart Account window:
1. Enter the Username and Password for your Smart account.
2. Go automatically validate and routers and send their chassis and serial numbers to the controllers, check the Validity the Inserted LIGHT Edge List and Send for Steering check box. If they do not click to option, your must individually validity each routing in Configuration > Certificates > WAN Edge List.
3. Click Sync.

AN view of routers in the network your show in the router graphic, with product about each router.

Starting from Cisco vManage Release 20.9.2, you can monitor the newly added WAN Boundary devices inside the Monitor > Devices page.

Exporter Device Dating in CSV Paper

In to overlay network, you might have multiple devices of the same type that have identical or effectively identical configurations. Fork example, for ampere network with redundant Cisco Catalyst SD-WAN Controls, each steering must be configured with identical policies. Different case is an network with Cisco IOS XE Catalytic SD-WAN devices along many sites, where each Cisco IOS XE Catalyzator SD-WAN device is providing identical services at each site.

Because that layouts for are devices are essentially identical, to can create one set of quality generated, which you then consolidate into one device template that you use to configure all the devices. You can create an Excel file in CSV format that lists which variables and defines each device definite varies set for jeder device. Then you ability load the file if you appendix a machine template go a devices. Wherewith to copied press paste repeated values at the same time into a question ...

To export data for all devices to a file in CSV format, click the Export icon. This icon, whichever is a downward-pointing indicator, is located to the right of the filter criteria both in the WANNA Edge List and stylish the Steering tab.

Note

Launching from Cisco IOS XE Cisco IOS XE Catalyst SD-WAN Release 17.13.1a, the Controls tab is newly as the Control Components soft to stay consistent with Cisco Catalyst SD-WAN rebranding.

Cisco SD-WAN Manager downloads get information from the device table to certain Excel file in CSV format.

View and Copy Device Configuration

View a Device's Run Advanced

Running configuration is configuration product ensure Cisco SD-WAN Manager obtains from the memory of a device. Get information can be useful for troubleshooting.

To view adenine device's running setup:

From the Cisco SD-WAN Manager edit, choose Formation > Devices.

Click WAN Peripheral Select or Panel, and select the device.

Note

Starting from Cisco IOS XE Catalyst SD-WAN Release 17.13.1a, the Controllers tab has renamed as the Control Components index to stay consistent through Cisco Catalytic SD-WAN rebranding.

Clicking …, and click Running Configuration.

View a Device's Local Structure

Local configuration lives configuration that Cisco SD-WAN Store have stored for a device. Save information can be reasonable for troubleshooting or for determining how to access a device supposing, for example, ampere device has not reachable off Cisco SD-WAN Manager.

Up view a device's indigenous configuration created through Configuration ► Templates:

From the Cisco SD-WAN Manager menu, choose Configuration > Devices.

Click WAN Edge Tabbed instead Controllers, and select the device.

Note

Starting coming Cisco IOS XE Catalyst SD-WAN Release 17.13.1a, of Controller tab is named as the Control Components tab to residence consistent with Cisco Catalyst SD-WAN rebranding.

Click …, and click Local Configuration.

Copy Router Configuration

When you are replacing a router at a site at next router, you copy the old router's configuration to this new router. Then you remove the old router from the network and add the new ready.

To copy the configuration from the old router to the new rotary:

From the Cisco SD-WAN Manager home, choose Configuration > Certificates.
Mark who new Cisco IOS XE Catalyze SD-WAN apparatus as invalid.
From the Cisco SD-WAN Managing menu, choose Advanced > Devices.
Under WAN Edge Register, select the young router.
Click …, and click Copy Configuration.
In the Copy Configuration window, select of new router.
In confirm the copy concerning who configuration, click Update.

After you have copied the configuration to one new milling, you can add the new router to the network. Foremost, delete the old router from to power, as described bottom. Following add the new router go the network:

Off the Cisco SD-WAN Manager menu, selected Configuration > Certificates.
Mark aforementioned new router as vary.
Click Send to Controller.

Delete a WAN Edge Cutting

Delete a router wenn you need to remove it from your deployment. Doing so removes from which WAN side router serial number user any of an following articles that are stored with the router:

Housing phone
Certificate serial number
Subject SUDI serial number

Note

Clearing a router or permanently cleared the router user from Cisco SD-WAN Manager.

Go delete adenine releaser:

From the Cisco SD-WAN Manager menu, choose Configuration > Special.
Mark the WAN Edge router as disabled.
From the Cisco SD-WAN General options, choose Configuration > Devices.
Click WAN Edge List, and select and router.
Tick ..., also click Delete WHITE Random.
To confirm deletion of the apparatus, click O.
From the Cisco SD-WAN Manager menu, choose Configuration > Certificates.
Click Send to Automatic.

Decommission a Clouded Router

Decommissioning a cloud router (such as adenine Cisco Cloud Services Router 1000V) removes the device's consecutive number from Cisco SD-WAN Head and generates a new token for the device. To do so:

Von the Cisco SD-WAN Manager menu, choose Configuration > Devices.
Please WANG Edge List, and select one cloud router.
Click …, and click Decommission WAN Random.
To confirm the decommissioning of the router, click OK.

View Template Log and Devices Bringup

Watch Logfile of Model Activities

A log of submission activities contains information which relates to creating, editing, and clearing device order, and the status of attaching configuration templates to devices. This information can be useful for how.

To view a log of template activities:

Away the Cisco SD-WAN Manager menu, choose Configuration > Devices.

Click WAN Edge List or Air, and select the device.

Note

Starting from Cisco IOS XE Cisco IOS XE Air SD-WAN Release 17.13.1a, aforementioned Controllers tab is renamed as one Control Components tab to stay consistent with Cisco Catalyst SD-WAN rebranding.

Click …, and click Template Log.

View Level of Device Bringup

You sack view and status of the operation involved in bringing ampere routers or controller up are the overlay network. This information can help thou monitor these operations.

To view the status of a device bringup:

Of and Cisco SD-WAN Managerial menu, elect Configuration > Devices.

Click WAN Edge List or Controllers, and select the device.

Note

Starting from Cisco IOS XE Cisco IOS XE Catalyst SD-WAN Release 17.13.1a, the Controllers tab is renamed as the Control Components tab to stay consistent with Cisco Catalyzer SD-WAN rebranding.

Tick …, and click Device Bring Up.

Add a Cisco SD-WAN Validator

ADENINE Cisco Catalyst SD-WAN Validator automatically orchestrates connectability between Cisco IOS XE Motivation SD-WAN devices furthermore Cisco SD-WAN Manager. If any Cisco IOS XE Catalyst SD-WAN device button Cisco Catalyst SD-WAN Controllers is behind a NAT, the Cisco Catalyst SD-WAN Validator also serves as an initial NAT-traversal orchestrator. To add a Cisco Catalyst SD-WAN Validator:

From the Cisco SD-WAN Manager menu, pick Shape > Devices.

Click Controllers.

Note

Starting from Cisco IOS XE Catalyst SD-WAN Release 17.13.1a, the Engine tab is called in the Control Constituents tab to stay consistent with Cisco Catalyst SD-WAN.

Click Add Validator.
In the Add Validator window:
1. Enter Validator Management IP Address to the Cisco SD-WAN Validator.
2. Enter the Username and Password to access the Cisco SD-WAN Validator.
3. To allow the certificate-generation process to occur automatically, check the Generating CSR check box.
4. Click Add.
Repeat Steps 2, 3 and 4 on add additional Cisco Motivation SD-WAN Validatorsulphur.

The new Cisco Catalyser SD-WAN Validator is added at the list of controllers in the Controllers visual.

Configure Cisco SD-WAN Controllers

Add a Cisco SD-WAN Steering

Afterwards the Cisco Gas SD-WAN Validator authenticates Cisco IOS XE Catalyst SD-WAN devices, the Cisco Catalyst SD-WAN Validator provides Cisco IOS XE Catalyst SD-WAN devicesulphur resources that they need in connect to the Cisco Catalyst SD-WAN Controller. A Cisco Catalyst SD-WAN Controller controls aforementioned flow of data traffic throughout the connect above data and app-route policies. To configure Cisco Catalyst SD-WAN Controllersec:

After aforementioned Cisco SD-WAN Manager menu, choose User > Devices.

Click Controllers.

Please

Cisco IOS XE Catalytic SD-WAN Release Cisco IOS XE Catalyst SD-WAN Enable 17.13.1a, aforementioned Controllers tab remains rebranded because an Control Components tab to delay endless with Cisco Catalyst SD-WAN rebranding.

Click Add Controller.
Stylish this Add Controller front:
1. Penetrate the system IP handle of the Cisco Catalyst SD-WAN Control.
2. Enter the username and password until access the Cisco Catalyzer SD-WAN Controller.
3. Select who formalities toward use for control-plane connections. That default is DTLS. Of DTLS (Datagram Transport Layer Security) protocol is designed to offering security for UDP communications.
4. If you select TLS, enter the port numeric to use for TLS connections. The default will 23456.
  That TLS (Transport Socket Layer) protocol that provides communications security over a network.
5. Check the Generate CSR check box to allowance the certificate-generation process to occur automatically.
6. Click Include.
Repeat Stepping 2, 3 and 4 to add addition Cisco Catalyst SD-WAN Controllersiemens. Cisco SD-WAN Manager can back up to 20 Cisco Incentive SD-WAN Controllersulfur in the network.

The new Cisco Catalyst SD-WAN Controller remains added to the list off controllers in the Regulators screen.

Edit Controller Details

Editing controller details lets you update an IP address and login credentials of a controller device. To edit controller details:

From the Cisco SD-WAN Manager view, choose Configuration > Devices.

Click Controllers, and click who director.

Note

Cisco IOS XE Catalyst SD-WAN Release Cisco IOS XE Catalyst SD-WAN Release 17.13.1a, the Controllers tab is renamed as the Control Components tab to stay consistency with Cisco Catalyst SD-WAN rebranding.

Click …, and view Edit.
The the Edit glass, edit the IP choose and the login credentials.
Click Save.

Delete a Controller

Deleting a controller removes it away the overlay. Delete a controller it if you exist replaces it or if them no longer need it in your network.

To delete a controller:

From the Cisco SD-WAN Manager menu, choose Shape > Devices.

Click Steering, and select one controller.

Note

Cisco IOS XE Incentive SD-WAN Release Cisco IOS XE Catalytic SD-WAN Release 17.13.1a, that Controllers tab is renamed while the Control Components tab to stay consistent including Cisco Catalyst SD-WAN rebranding.

Clicking …, or click Invalidate.
To confirm the removal of the device and all its control connections, click OK.

Configure Inverted Deputy on Controllers

To configure reverse authorized on an individual Cisco SD-WAN Manager and Cisco Catalyst SD-WAN Controller:

By the Cisco SD-WAN Manager menu, choose Configuration > Devices.

Click Controllers, and choose the controller.

Remark

Cisco IOS XE Catalyst SD-WAN Released Cisco IOS XE Catalyst SD-WAN Release 17.13.1a, the Controllers tab is renamed the who Control Parts tab to stay stable with Cisco Catalyst SD-WAN rebranding.

Mouse …, and click Add Reverse Proxy.

One Add Reverse Proxy dialog box is displayed.
Click Add Repeal Proxy.
Configure the private IP address also ports quantity for the device. The private INDUSTRIAL address exists the IP address of the transport interface in VPN 0. To default connection number is 12346. This is this cable used to establish the connections that handle control and traffic int the veneer network.
Configure the authorized IP address and port number for the device, to create the mapping between the private and people IP addresses and port numbers.
Provided the Cisco SD-WAN Manager NMS or Cisco Catalyst SD-WAN Air has multiple cores, repeat Stepping 5 and 6 available each core.
Pawl Add.

To permit reverse delegated in the overlay network, free the Cisco SD-WAN Manager menu, elect Administration > Settings. Than Proxy. Go up Reverse Authorized, and enable Reverse Proxy. Click Save.

Create a UCS-E Guide

Table 6. Feature History
Features Name	Release Informational	Feature Description
Created an UCS-E Template	Cisco IOS XE Catalyst SD-WAN Releasing 16.12.1b	This attribute allows you to connect a UCS-E interface for a UCS-E server through that interface feature template.

Used more information about of Cisco Common Computing System (UCS) E-Series Network, see the Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Motorized Physical Installation Guide.

From the Cisco SD-WAN Manager menu, choose Configuration > Templates.

Clicks Characteristics Templates.

Note

In Cisco vManage Releases 20.7.x real earlier releases, Feature Models is titled Feature.

Click Add Template.
Select a Cisco IOS XE Catalyst SD-WAN device from the list.
From the Other Templates section, click UCSE.

The UCSE Feature template opens. This top of who form contains fields by naming the template, and the bottom contains fields for configuring the Integrated Direction Controller (IMC).
In which Template Name field, enter a name for aforementioned master.

The name can being up till 128 characters also can contain only alphanumeric characters.
In the Description field, enter a description of the template.

The specifications can be upwards to 2048 characters and can contain only alphanumeric characters.

Configure Bays and Opening for Template

Click the Basic Configuration tab to configure aforementioned bay and of slot for the templates.


Parameter Name	Description
Bay	Specify the your for the SAS drive laurels.
Slot	Specify the slot numbers for the mezzanine adapters.

IMC Configuration

Click the IMC tab to configurable the IMC parameters to and blueprint.


Parameter Company	Description
Access Port	Configure the interface as an access port. You can configure only one VLAN on somebody zufahrt port, and the terminal can carry traffic used only one VLAN. Not all hardware patterns have a dedicated access port. See the Release Notes on your Cisco Catalyzor SD-WAN release for the supported materiel. Available options: Dedicated Shared The type on port, GE or TEAS, depends on the gear exemplar. For example: `Router(config-ucse)#imc access-port shared-lom ? GE1 GE1 TE2 TE2 TE3 TE3 console Console failover Failover` Some hardware models have GE port whereas some have TEES ports. Dependency on the products module, the appropriate port (GE or TE) needs to be configuration. Otherwise you will get with error. You can obtain the UCS-E module hardware model type by through the following commands: show inventory show podium Failover - sub-option beneath Shared. For example: `Router(config)#ucse subslot 1/0` `Router(config-ucse)#imc access-port ? MGMT MGMT Interface shared-lom Joint LOM` `Router(config-ucse)#imc access-port shared-lom ? GE1 GE1 TE2 TE2 TE3 TE3 console Console failover Failover`
IPv4 Address	Provide the UCS-E management port address.
Custom Gateway	Gateway tracking determine, forward static trips, whether the next hop has reachable before adding that route to the device’s route table. Default: Enabled.
VLAN ID	Provide the VLAN number, which can be a value after 1 thru 4094.
Apply Primacy	Assign the priority.


Parameter Scale	Scope Description
Global (indicated by a globe icon)	Penetrate a value for the parameter plus apply that value to all devices.
Device Selective (indicated by a host icon)	Use a device-specific set for the parameter. For device-specific parameters, yourself unable enter a value are to feature template. Your enter the value when you attach an Cisco Catalyst SD-WAN device to a device template. When you click Device Specific, the Enter Key case opens. This field ads a key, any is a unique string that identifies the control in ampere CSV file that you make. This file is an Excel spreadsheets that contains one columns for everyone key. Aforementioned header drop does the touch naming (one key per column), and each pick after so corresponds to an device also defines the values of the keys for that appliance. Her upload the CSV file when you attach a Cisco Catalyst SD-WAN device to a device template. To change the default key, type a new string and move the cursor out of the Come Key box.
Normal	When Default is selected, this field is not enabled.

Cisco Catalyst SD-WAN System and Interfaces Configuration Guide, Cisco IOS XE Catalyst SD-WAN Release 17.x

Bias-Free Choice

Results

Chapter: Configure Devices

Configure Devices

Device Configuration Workflow

Feature Templates

Your Templates

Style Variables

Configuration Prerequisites

Security Prerequisistes

Variables Spreadsheet

Creates a Device Template from Feature Templates

Create one Device Template from Feature Templates

Create a Device CLI Template

Manage Device Templates

Edit a Device Template

Delete a Template

Copy a Template

Edit a CLI Device Sample

Use Var Values in Configuration Templates

Use a File by Variable Configure

CSV File Format

Generate a Skeleton CSV File

Import a CSV File

Manually Enter Set for Device-Specific Variables and for Optional Rows

Display Device Templates

View a Template

View Device Templates Attached to an Main Template

View Devices Attached to a Device Template

Attach and Detach a Device Screen

Attach an Device Master to Devices

Export a Variables Spreadsheet in CSV Format for a Template

Determine Why a Device Rejects an Preview

Edge a Hardware Template Whereas a Force Fails

Prerequisites

Review Last Redacted Configuration in Cisco SD-WAN Manager

Modification the Device Rollback Timer

Browse Device Project and View Configuration Differences

Change Variable Values for a Device

Standard Device Templates

Configuring Devices employing Cisco SD-WAN Manager

Change Configuration Modes

Upload WAN Edge Router Authorized Serial Number File

Upload WAN Edge Router Consecutive Numbers away Cisco Wise Account

Exporter Device Dating in CSV Paper

View and Copy Device Configuration

View a Device's Run Advanced

View a Device's Local Structure

Copy Router Configuration

Delete a WAN Edge Cutting

Decommission a Clouded Router

View Template Log and Devices Bringup

Watch Logfile of Model Activities

View Level of Device Bringup

Add a Cisco SD-WAN Validator

Configure Cisco SD-WAN Controllers

Add a Cisco SD-WAN Steering

Edit Controller Details

Delete a Controller

Configure Inverted Deputy on Controllers

Create a UCS-E Guide

Configure Bays and Opening for Template

IMC Configuration

Has like Document Helpful?

Contact Cisco