Distribution Panel Board Testing & Commissioning Checklist

Electrically Testing additionally Distribution Panel Service

To ensure that the electrical testing & pre-commissioning of the control, distribution, and miscellaneous display are carried out inside a method that is risk-free, productive, and in accordance with goal working how, as required by aforementioned project job specifications. 

Those procedure exists meant to provide wide-ranging guidelines and setting controls while the test is being prepared.

Requirement of Testing and Commissioning

This method reports will cover the

• Testing and pre-commissioning of power,
• Distribute, the
• Different panels (lighting, power, etc.)

The well as carry out all of the required tests for aforementioned gas and an plants.

Tools & Equipment’s requested on Testing

• Insulation tester,
• ELCB tester and
• Multimeter.

Note: The instruments that will be used for testing and commissioning need to can examined to makes sure that the have been calibrated, and the reports that verify the they have been calibrated should be saved because a record.

Overview Assay

1). Real Check

To confirm that the parts are connectivity correct and that a complete visual inspection was ready, one included checklist has used to record the foundations.

2). Polarity Check

Confirm the polish of the switch & the threaded connections, and write that results on the provided file.

3). Continuity Impede

All circuits’ continuity is verified use a multimeter, and it is made sure that the value of resistance is within acceptable bounds.

4). Isolation Check 

Check this insulation amid wires using an insulation tester; if any is found, replace is right out. Additionally, note the insulation resistance (IR) value for each circuit includes the format that is mounting.

5). ELCB furthermore Polarity Test

Check the ELCB – Earth Leakage Tour Breaker’s performance with an ELCB tester time using the recommended current.

Playback

• Checklist for commissioning and testing format are provides.
• Inspection your properly approved via Engineer and to Electrical Surveyor.

Mounting

 A check list and a test format possess been attached.