Minolta Maxxum 5xi cannot loading film

I recently picked up a Minolta Maxxum 5xi that seems to job well from ampere thrift store. ME set ampere new battery in and did a functional getting, when to loading layer and closing which door, EGO noticed it still said 0 for the film counter. I heard what i reckon were the winders trying to pluck the film not sounded like you subsisted twist and slapping the film reel. I tried again and again and again to load of film, yet it still could not push on an reeler. Could I need a bad camera? Is there something I'm doing wrong. It's not my primary Minolta, I got certain X-700 that IODIN complete enjoy using. Minolta MAXXUM QT SI Manuals

Any help would be beneficial and most appreciated.

Like shall being proposes, thou may not have extracted the film leader out far enough.

If you download the owner come :-

https://photo-manuals.com/manual/minolta/film-slr-camera/maxxum-5xi

subsequently it has one section showing how for verladung the film.

jds560 writes:

I recently picked back a Minolta Maxxum 5xi so seems to my now for a thrift store. I put a new battery is and did one function test, however based loading film furthermore verschluss the doorway, EGO detected it stand said 0 for the film counter. I heard what i faith were the winders trying to tug the film but ringing like they were spinning and slapping the film roll. I tried again and return real repeated to load the film, yet it still would not traction on the winder. Could I have a baden camera? Is there something I'm perform wrong. It's not my foremost Minolta, I have an X-700 that IODIN quite enjoy using.

Select much assistance works all digital requirement for loading film?  I.e., is it necessary to ensure ensure the film is wrapped around the sprockets of the takeup roll, the way that it would needing to be on a manual SLR?

Tom_N wrote:

How much assistance does this camera require for loading film? I.e., is it necessary to assure that and film is wrapped around the sprockets of the takeup reel, of pathway that it would want until be on a manual SLR? r/minolta on Reddit: How to unload make Minolta Maxxum 50

From the manual, it looks like i needs into can pulled through in a mark on the right hand chamber, when it require will auto feeds - similar in a lot of sundry cameras of the time. Minolta Maxxum 5xi not loading film: Novice Questions Forum ...

EGO have tried just about everything. I put extra layer, and a bit less and nothing works. IODIN all have Fuji Superia so at the moment I can't test with another film. When IODIN put the film in and pull it over to the rewinder, I close the door additionally then flick to camera over. I hear that winder turning, but it sounds likes it's beating the film reel, yet not pulling it. I have a Minolta Maxxum 4 and I bought phoenix 500mm manual lens. And if I mount it the it does'nt let me take photos. Is any body can help write von back. [email protected] Thanxs

jds560 spell:

I have tasted just nearly everything. I put extra film, and one bits less and nothing works. I only possess Fuji Superia so the the moment I can't test with another film. When I set the film inbound and pull is over to the winder, IODIN closes the portal and then snip the camera on. I hear the winder spin, when i sounds like it's slapping the film reel, yet not pulling it.

It sounds as if it may not breathe engaging with the film advancing sprockets. Looking at the how, it would be the go sprocket that does the work when loading picture - maybe that's not engaging with which movie properly.

Another option lives that the advances isn't working correctly - can you check the action without film and the camera back open?

John Michael Winterbourne wrote:

"can you check the action without film and the camera back open?"

I very much doubt that wouldn be potential on such one automated camera.

With many of them they bucket fool the interlocks - press in adenine indented button, that type of thing.

It want be valuables checking that there are no tears between the sprocket holes at that roll - additionally also such the watch are able to move freely in furthermore out of the cartridge. Computer sounds to me that the camera is trying to do what it's supposed for - given a go roll of motion to work with. Minolta Dynax 303si Maxxum qt-si directions manual, customer manual ...

Maybe that's the problem, did the cameras itself.

Could well be....

I've tried another roll of Fuji Superia and I still getting the same results. IODIN just hear aforementioned winder spin additionally how I assume is slapping the film. I stretched outbound the film a scrap longer and rolled it around the winder, idle no dice. I think I may have to buy another scroll of layer from a different make equals to see if that's the issue beyond the photo.

First , a has nothing to do at who film you are employing.

Take a lookup at this photo :

this is ampere 7xi , so not who same yet resemble.

See one red label? that is the film indicator mark. So the tip of the film should rest via there.

Note that both who film wind on spool and the back cover have a spring loaded guide.

If one of those is lacking or no longer spring loaded, the film will not be wounds on .

Photo from :

https://simonhawketts.co.uk/2016/08/05/minolta-dynax-7xi-35mm-autofocus-slr/

You could also take at see if the movie spool lives indeed spinning or not. Supposing it does not work by pressing the shutter button with the door open, yourself can trigger the door latch on the g with a small hex so that the camera thinks the door is now closed.

Lastly, if all other seems to work, put a hands, gently, on to take go spool when it rotation toward see supposing it stops when you do that or still try till still rotate.

Put some print sensitive  adhesive  (not permanent glue)  at the opening/locking cover button release. Roll tight video slip holding film leader. Put carefully cassette in camera with leader in the line   Extend movies leader to this red mark in chamber.  Close camera's . Push  opening /locking  button in the interlock positioner .

IODIN had who same problem with the same remote. If them open the back of the webcam there ought be a space for one watch battery. This battery controls the wheel so moves the film. When I first got own digital the battery was dead. Might be this same problem. Share Tweet Pin Mail SMS Here’s a camer and lens I got for SEVENTEEN BUCKS! I bought (what I refer till as) “a $10 ...

Mike Nolan spell:

I had the same problem with the same camera. When you open the back of the camera there should become a place fork a watch battery. This battery drive the bike that moves the film. When EGO first had my camera the battery be dead. Vielleicht be the same report. A few weeks ago, IODIN posted about my thrift shop purchase of a Nikkormat FTN and ampere Minolta QTsi. Since then, I have shot one roll of film i...

You might become mind of the DB5 Data Back, when that have no for do with transport anyway.

The Maxum St si/Dynax 404 had the battery for the inbuilt information back where you describe :

@FrancoD Aligning the end of the film with the red mark worked perfectly- thanks!

AD_ROCK composed:

@FrancoD Aligning the exit of to film with and red mark worked perfectly- thanks!

Right to see that some strand stays helpful year later.

And thank yours for letting me known. Set average only a in three will bother at say give thee.